Crushing and screening complex DSK

This option allows you to process up to 95м3/hour to download, depending on the granulometric composition of the feedstock. The recommended maximum size of the breed to 300mm. Typical layout of the accommodation (can be changed based on the location of on the spot). All process equipment is designed, manufactured, and installed on steel structures - supporting frame that allows it to be quickly assembled, disassembled. Under the units do not require specially constructed Foundation, equipment is placed on the paved areas. The equipment is made of the best technologically advanced steel grades with the use of reliable and quality components. CRUSHING-and-SORTING COMPLEX " DSK " includes: Vibrating feeder АПВ08 (Motor - 7.5 kW ) - 1 PC Separators EMIS-100/30 Power of motor 3 kW - 1 PCs Crusher dim 800K (Motor – 75 kW Weight (with jib crane, without ZIP) – 15.6 t) - 1 piece The sorting unit AC-32 the Number of sieves 2 (sit to order) Motor - 7.5 kW Weight 4,8 t - 1 piece Unit with control cab, with the BALLAST (cable production) Power 7.5 kW 1 set Conveyor equipment - 1 set Design works - 1 set ●Range of conveyor equipment may change after consultation and approval of the final layout decision. The power consumption of complex ~to 110 kW/h (150 HP) Benefits of the DSU: ●Low power consumption. Energy savings compared to DSU similar performance from other manufacturers is up to 140,000 USD per year. ●All process equipment is designed, manufactured, and installed on steel structures - supporting frame that allows it to be quickly assembled, disassembled. Under the units does not require a special Foundation equipment is placed on the paved areas. ● Single-stage crushing. ● Control system DSU allows you to quickly change modes of operation of the equipment and make fine adjustments in the technological process of work, to maintain a stable granulometric composition. ● Designers are working on the technological diagram of equipment with reference to place. All components of technological lines combined so as to give maximum utilization of each unit. PACKAGE contents: 1.Vibrating feeder APV-08 Capacity of the hopper 7 m3-Width of the tray 800 mm. Performance, up to 95 m3/h Weight: 5.0 t dimensions 4160х2650х2830мм. Electric motor power, 7.5 kW Vibrating feeder APV-08 consists of a vibrator, pan, frame, drive and hopper. ●Built-in control system frequency Converter allows stepless change the frequency of rotation of the shafts of the vibrator to adjust the performance of the feeder (the speed of the material). ●The available weights in the vibrator expand the range of control performance depending on the properties (size, presence of binding components, etc.) of the feed material. ●Hopper feeder is protected by a lining wall. 2. The self-unloading separators EMIS-100/30 Separators suspended on slings above the conveyor belt. Removes metal contamination weighing up to 20 (15) kg (dependent on the particle size of the material of the breed) from a flow depth of 300 mm. depth of the zone of extraction of 300mm. Power 2.3 kW. Overall dimensions 2250×1550×570мм 3. Crusher dim 800K Universal crusher dim 800K to obtain cubiform crushed stone from strong rocks (protected by patents of the Russian Federation). The electric circuit of the automatic control machine dim-800K can be implemented on basis of controller S7-221 Siemens, equipped with a soft starter (soft starter) ATS22C14Q. Technical specifications dim 800K Name of parameter Numeric value The dimensions of the crushing elements, mm - diameter of the projections of the hammers (beat) on the rotor; ................................. 800 - working length of the rotors ....................................................... 800 The number of rotors, PCs.: guides/reflective ............... 1/2 Rotation frequency of rotors, Rev/min - nominal ................................................................................. 800 - minimum (in the presence of the frequency Converter) .................... 400 Driving motor power, kW ...................................... 75 Nominal frequency of rotation of the motor shaft, Rev/min........... 990 The feed opening size of the hopper, mm longitudinal/ transverse ...............1476/1158 Mass of crusher without the frame and drive, t................................................ 10,7 Weight of crushing machine (with jib crane, without SPTA), t....... 15,6 Dimensions crushing and grinding crusher, m: Dean x Width x Height without cantilever crane (up to the receiving resp.) .....4,71х5,125х4,340 Height with jib crane .............................................................. 4,875 4.The sorting unit AC-32: The sorting units consist of a welded frame on the skids, catwalks, stairs to entrance to the maintenance area and the roar mounted on pedestals attached to the frame. Under the rumble on the frame is mounted the hopper, and at the end of the screen box, the lower tray and upper tray for discharging sorted into fractions of material. The shaft of the vibrator is installed on special vibration double row spherical roller bearings with lubrication system and cleaning (without disassembly). Box crash not welded structure, which increases its service life. All bolted connections made of high strength fasteners. All rotating machinery is fenced. AC-32 The size of the sifting surface, 1250х3500мм. The number of sieves 2. Capacity of up to 100m3/hour. The motor is 7.5 kW. Weight 4,9 t dimensions 5060х5490х3542 mm 5. Unit with control cab, with the BALLAST (cable production) ●Control cabinets, frequency inverters and control panel mounted in cab controls. ●The control cabin has insulated walls and is installed on a frame with a height of 4 m. ●Installation of electrical equipment of the cab and load programs into programmable controller is manufactured at the factory and checked. ●The program provides the possibility to work in automatic or manual adjustment or modes. The start and stop of the equipment is in automatic mode, for a given algorithm. ●In-cab controls outlet provided for connection of the heating and other equipment. 6. Conveyor equipment The conveyor consists of a RAM drive, intermediate and idler connected in series, as well as the supporting structures, frames and supports. Design conveyor: conveyor support V shaped structures, rectangular cross section. Type pipeline section, length of section 5 m, welded from angular profile. The maintenance area. the Company provides the customer with a regular supply of spare parts and consumables.