Primer-enamel for rust "Spetsnaz"

5.04 USD

Special conditions

Supplier: JSC Association Yaroslavskie kraski

Description

To protect steel and iron surfaces, covered with rust and the remnants of the old coating is tightly coupled to the metal: metallic structures, including large, complex profile, purification of which is difficult (grates, fences, garages), for repair painting of vehicle parts (wings, undercarriage, etc.). Three-layer coating is applied as a standalone for protection of metal surfaces, operated in atmospheric conditions, in an industrial atmosphere containing aggressive vapours, gases, in terms of exposure to salts and other chemical agents (at temperatures up to +60 ° C). Optionally can be overcoated with enamels and lacquers type XC, XB, NC, PF, EP after 24 hours of aging the dried coating in vivo. Advantages - 3 in 1: rust Converter, primer and decorative coating. - Does not require the application of other protective materials. - Allows to carry out painting work when ambient temperature is -10°C. - To withstand transportation and storage at negative temperatures. - Quick-drying.

Characteristics

Drying of each layer of enamel at a temperature of (20 ± 2) С: 30 minutes, final - 1 hour, readiness for enamel application - 24 hours
Structure: synthetic resins with targeted additives, pigments, fillers, organic solvents, anti-corrosion additives
Coating resistance to static impact of 3% sodium chloride at a temperature of (20 ± 2) ° C, h, not less: 72
Nominal viscosity according to a viscometer of the VZ-246 type with a nozzle diameter of 4 mm (VZ-4) at a temperature of (20.0 ± 0.5) ° C, s: 40-80
Suitable substrates: rusty metal
Consumption: 1 kg per 7-10 m²
Grinding degree, micron, no more: 70
Packaging: 0.8-20 kg
Mass fraction of non-volatile substances,%: 34-45
The hardness of the coating according to the pendulum device of the TML type (pendulum A), rel. units, not less: 0,15
Warranty period: 18 months from the date of manufacture
Film adhesion, points, no more: 2
Transport and storage: Transport and store in a tightly closed container away from heating appliances. Protect from moisture and direct sunlight. Keep out of the reach of children. Withstands transportation and storage at low temperatures.
Properties: - applied directly to rust - quick-drying 30 min - used to protect metal surfaces used in aggressive environments - withstand transportation and storage at negative temperatures - allows painting work at ambient temperatures down to -10 ° С
Film strength upon impact on the U-1 device, cm, not less: 40
Flexural elasticity of the film, mm, no more: 1