Snowplow on the KAMAZ-65115 dump truck

Production and sale of combined road machines based on KAMAZ-65115 s / s Perhaps making a finished machine or installing equipment on your chassis Service maintenance. Regular customers discounts! Sand spreading equipment Bunker capacity, m3 7.0 The thickness of the sheet metal hopper 4.0 Drive equipment Hydraulic (as a conveyor drive it is possible to install the hydraulic motor RPG-6300 or a worm gearbox with a hydraulic motor) The density of the dressing, g / m2 10 ... 500 Spreading width, m 2-10 Adjusting the width and density of dressing Stepless with two manual hydraulic flow regulators mounted on the hopper Conveyor type Scraper, chain Syst. cleaning the conveyor from excess sand-salt mixture Available with a polypropylene bristle brush installed in the rear of the grit bin Front swivel blade Height of blade, mm 800 Blade length, mm 3000 The thickness of the sheet pen blade, mm, not less than 4.0 Thickness of plowshare, mm, at least 40 Width of processing, mm 2600 The height of the cleaned layer of fresh snow, m 0,2 Working angle, degree +/- 30 Lifting-lowering hydraulic drive Manual Rotation / Hydraulic Actuator Weight, kg 370 Working speed during snow removal, km / h 40 Speed ​​blade Maximum wing height, mm 1500 The length of the plane of the knife, mm 3600 Width of processing, mm 2700 The thickness of the sheet pen blade, mm, not less than 4.0 The thickness of the blade sheet blade, mm, at least 12 Working angle of the knife, 40 degrees Lifting-lowering hydraulic drive Weight, kg 1000 Operating speed during snow removal, km / h Up to 50